Diy elevated dog feeder10/20/2023 ![]() ![]() Once the paint and finish are dry, reinstall all of the hardware, slide the drawers back into the dresser, add the dog bowls on top, and you’re done! The varnish gives it a nice polyurethane finish, so even when the dog is messy about eating and drinking, the paint job will still be protected. I gave the outside of the dresser and the drawer fronts two coats of paint with Americana Decor Chalky Finish paint in Lace, and then I sealed the whole project with Americana Decor Soft Touch Varnish in clear. I wanted to paint my dog bowl stand because the dark brown doesn’t really match our house, plus it was pretty beat up from years of use. If you’re not planning to paint your DIY raised dog bowl stand, then you’re done! Put the drawers back in, and put the dog bowls in the top, and start using it! Repeat for the other circle.ĭon’t worry if the edges are a little bit jagged or ragged or not perfectly circular it will be totally hidden by the dog bowls! Slide the blade of your jigsaw into the pre-drilled hole, then turn on the jigsaw and carefully cut around the inside line that you drew until the center disc of wood falls free. The hole needs to be large enough that your jigsaw blade will fit inside of it jigsaw blades are made for cutting forwards and they only have teeth on one edge of the blade, so you won’t be able to get the jigsaw blade into the center of your dresser unless you pre-drill a large hole for it. This second pencil line will be where you cut, because you want the rim of the bowl to sit on top of the dresser and not fall through the hole.ĭrill a large hole in the center of the circle you plan to cut out ( or you can drill two smaller holes right next to each other). I had to do a little repair work to my dresser, so I used wood glue and a quick grip clamp to fix the broken piece.įigure out approximately where you want your dog bowls to go in the dresser, then turn the dog bowl upside down on top of the dresser and trace the rim of it with a pencil in each spot.ĭraw a second pencil line about 1/2” inside of your traced line. If you’re planning to paint, remove all of the hardware ( drawer slides, handles, etc.) from both the dresser and the drawers. The first step is to take the drawers out of your dresser. Americana Decor Soft Touch Varnish in clear.Americana Decor Chalky Finish paint in Lace.two dog bowls with rims ( these are the ones that we use).a small 2 drawer dresser ( I repurposed one I had laying around, but you can find similar ones at Target or Walmart or online on Amazon).wood glue and quick grip clamps ( only if you need to repair any pieces of your dresser).NOTE: If you don’t paint your dresser, this project takes less than half an hour from start to finish! Tools ![]() 4 and a half hours ( total project time).1 hour and 30 minutes ( time spent doing stuff).But if your small dresser is already the style or color you want in your home, it makes this project even easier all you have to do is cut two holes in the top! DIY Raised Dog Bowl Stand I started with an old, beat up laminate drawer unit, and I decided it needed a fresh coat of paint to spruce it up a bit. I got the whole project done in less than a day, and most of that time was spent waiting for paint to dry if you skip the painting portion, you can build a DIY raised dog bowl stand in less than half an hour! It keeps the bowls up out of reach of the baby, plus Fawkes doesn’t have to bend down to eat or drink, which will be helpful as she gets older. So as part of our baby-proofing efforts, I created a simple DIY raised dog bowl stand for Fawkes’ food and water bowls. AJ started crawling recently, and now she gets into everything! One of her favorite things to do is splash in the dog’s water bowl, which is cute, but not all that great for our hardwood floors.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |